Lufthansa Cargo's first freighter takes off with AeroSHARK technology

Lufthansa Cargo will begin equipping all Boeing 777 freighters with AeroSHARK from 2023

Lufthansa Cargos first freighter takes off with  AeroSHARK technology
X

Photo Credit: Oliver Rösler / Lufthansa Cargo

Listen to this Article

Lufthansa Cargo's first AeroSHARK-modified Boeing 777 freighter, registered D-ALFA, took off for the first time at 05:07 (CET) on February 3, 2023.

"Under flight number LH8410, the B777F started from Frankfurt to Bengaluru from where it will fly on to Chengdu," says an official release.

AeroSHARK is a surface film that mimics the microscopic structure of shark skin, the release added. "Its structure consists of ribs around 50 micrometres in size - so-called riblets. If the flow pattern on the fuselage and engine nacelles of the Boeing 777F is optimised in this way, significant savings in fuel and thus emissions can be achieved. This modification, developed by Lufthansa Technik and BASF, will now gradually be used on Lufthansa Cargo's entire fleet of 777 freighters, making them more fuel-efficient and reducing emissions."

Photo Credit: Oliver Rösler / Lufthansa Cargo

For the modified Boeing 777F, Lufthansa Technik expects fuel savings of slightly more than one percent, the release said. "Extrapolated to Lufthansa Cargo's entire 777 fleet, this will result in annual savings of more than 4,000 metric tonnes of kerosene and nearly 13,000 metric tonnes of CO2 emissions, equivalent to about 53 individual cargo flights from Frankfurt to Shanghai."

Dorothea von Boxberg, Chairwoman, Executive Board and CEO, Lufthansa Cargo says: "We are proud to be able to operate our entire freighter fleet even more efficiently in the future, thanks to Sharkskin technology and to further reduce the carbon footprint of our modern fleet. Our investments for the introduction of AeroSHARK bring us closer to our goal of being 100 percent CO2-neutral in the air by 2050; on the ground, we would like to achieve this goal as early as 2030."

In cooperation with BASF, Lufthansa Technik is responsible for the specification of the material, the airworthiness certification and the implementation of the aircraft modifications, which are carried out during regular maintenance layovers. In December of last year, the company obtained a Supplemental Type Certificate (STC) for two types of Boeing 777 from the European Aviation Safety Agency (EASA), paving the way for the serial application now underway on the 777 freighter fleet, the release added.


Tags:
Read Full Article
Next Story
Share it