Seven Hapag-Lloyd container vessels benefit from MacGregor’s Cargo Boost system

April 05, 2018: Container carrier Hapag-Lloyd opted for MacGregor’s Cargo Boost service, which is designed to increase the earning potential of existing container vessels through improving cargo carrying efficiency. MacGregor, part of Cargotec, is upgrading and optimising the container stowage systems on board seven Hapag-Lloyd C-class (Samsung 9,300 TEU series) container vessels. A contract for […]

Seven Hapag-Lloyd container vessels benefit from MacGregor’s Cargo Boost system
X

April 05, 2018: Container carrier Hapag-Lloyd opted for MacGregor’s Cargo Boost service, which is designed to increase the earning potential of existing container vessels through improving cargo carrying efficiency.

MacGregor, part of Cargotec, is upgrading and optimising the container stowage systems on board seven Hapag-Lloyd C-class (Samsung 9,300 TEU series) container vessels. A contract for four vessels was signed in December 2017 and was shortly followed by a further three in January 2018.

Upgrade work on the first vessels was carried out end of February, and the last ship is expected to be upgraded in May 2018.

A Cargo Boost is part of MacGregor's PlusPartner concept, which is a forward-thinking approach to ship design that considers all parts of the cargo handling system as a whole. These particular upgrades were designed to deliver greater cargo system flexibility and allow for higher stack weights for 40ft containers; a sector identified as holding some revenue potential.

“Prior to the contracts, Hapag-Lloyd and MacGregor worked closely to identify the optimum solution for each cargo system and its implementation process,” said Magnus Sjöberg, senior vice president, Cargo Handling, MacGregor. “Every MacGregor Cargo Boost upgrade is unique to ensure that it matches a shipowner's specific needs. However, all are designed to maximise a vessel's efficiency, deliver a better return on investment for the owner and to reduce emissions per transported cargo unit.”

“We have worked very closely with MacGregor on numerous newbuilding projects and upgrades, which have been carried out during scheduled dry dockings,” informed Lutz-Michael Dyck, director Technical Fleet Management at Hapag-Lloyd. “In the case of these C-class vessels, it was not possible to take them out of service for any length of time; therefore all work had to be done under tight schedules and completed within only a couple of working days. This called for very careful and detailed pre-planning, which was complemented with full-time supervision on board the vessels during the upgrade work.

“We already have three optimised ships back in service and are very satisfied with MacGregor's performance,” adds Dyck.

In addition to hardware upgrades, MacGregor's scope of supply included updating any relevant documentation, coordinating loading computer revisions, project management and full supervision during the modification works on board.

Read Full Article
Next Story
Share it